DIN SOFT SEAT GATE VALVE MANUFACTURER IN SAUDI ARABIA
DIN SOFT SEAT GATE VALVE are frequently employed in pipelines that transfer fluids or gases under high pressure and in situations where a full bore flow is required. They are also utilised in situations where a fully open or fully closed valve is required, as opposed to a partially open or partially closed valve.
Gate valves have the benefit of having a relatively low pressure drop, which means that the passage of fluid or gas through the system is not impeded. Gate valves are not appropriate for regulating flow or controlling pressure, and they can be slower to open and close than other types of valves.
1. Body: Cast iron
2. Disc: Cast Iron
3. Stem: Stainless Steel
4. Bonnet Gasket: EPDM
5. Bonnet: Cast Iron
6. Sealing Ring: EPDM
7. O Ring: EPDM
8. Stem Nut: Brass, Bronze
9. Holding Ring: Brass
10. Handwheel: Cast Iron, Ductile Iron
Nominal Diameter: DN50 to DN600
Nominal Pressure: PN16 to PN40
Design and Manufacture: BS5163
Face to Face Dimension: BS5163
Flange End Dimension: EN1092
Dimensions? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Unit: mm
PN16
| DN | L | D | H | D1 |
| 50 | 178 | 165 | 258 | 125 |
| 65 | 190 | 185 | 287 | 145 |
| 80 | 203 | 308 | 388 | 160 |
| 100 | 229 | 349 | 449 | 180 |
| 125 | 254 | 441 | 566 | 210 |
| 150 | 276 | 441 | 591 | 240 |
| 200 | 292 | 553 | 753 | 295 |
| 250 | 330 | 615 | 865 | 355 |
| 300 | 356 | 714 | 1014 | 410 |
