Valves Manufacturer in Saudi Arabia

sales@ksavalve.com

Zone 27 Street 230 Building 74 P.O. Box 14330 C Ring Rode Doha Qatar
KSA VALVE
KSA VALVE
VALVE MANUFACTUER IN KSA
VALVE MANUFACTUER IN KSA
VALVE MANUFACTURER IN SAUDI AREBIA
KSA VALVE
VALVE MANUFACTUER IN KSA
VALVE MANUFACTUER IN KSA
PlayPause
previous arrow
next arrow
 

Safety Valve

Safety Valve Manufacturer in Saudi Arebia

 

A safety valve is a type of pressure relief valve that is designed to protect equipment and personnel from overpressure or vacuum conditions. It is an essential safety device in many industrial applications, where the failure of a vessel or pipeline due to overpressure could result in catastrophic consequences.

The basic function of a safety valve is to release excess pressure from a system to prevent equipment failure, explosion, or other safety hazards. When the pressure in the system exceeds the set point of the safety valve, it opens automatically, allowing fluid or gas to escape until the pressure is reduced to a safe level.

Safety valves are commonly used in a variety of applications, including boilers, pressure vessels, pipelines, and storage tanks. They are designed to meet specific pressure and temperature ratings, and they can be designed to handle a wide range of fluids and gases.

Safety valves also known as Safety relief valves (SRV) or Pressure Safety valves (PRV). The primary function of safety valves is to protect environment, property and life by venting fluid from an over pressurized vessel or line. An overpressure event refers to any condition which would cause pressure in a pipeline, vessel or system to increase beyond the specified design pressure. A pressure Relief valve is a critical valve hence it must be designed and capable of operating at all times.

 

Types

  • Steam Safety Valve.
  • Thermal Safety Valve.
  • Conventional Safety valve.
  • Pilot operated safety valve
  • Bellow safety valve
  • Spring Loaded Pressure relief valves
  • Balanced bellows safety valves
  • Balanced Piston safety valves
  • Low lift safety valves
  • Full lift safety valves
  • Full bore safety valves
  • Conventional safety relief valves
  • Balanced safety relief valves
  • Pilot operated safety relief valves
  • Power-actuated safety relief valves
  • Standard safety valves
  • Direct loaded safety valves
  • Proportional safety valves
  • Diaphragm safety valves
  •  

Safety valves are used in a wide range of industrial applications to protect equipment, personnel, and the environment from the hazards of overpressure or vacuum conditions. Some of the common applications of safety valves are:

  • Boilers: Safety valves are an essential component of steam boilers, where they protect the boiler from overpressure conditions that could result in an explosion or other safety hazards.
  • Pressure vessels: Safety valves are used in pressure vessels, such as storage tanks, to protect them from overpressure conditions that could cause rupture or other failures.
  • Gas pipelines: Safety valves are used in gas pipelines to protect them from overpressure conditions that could cause pipeline failures or explosions.
  • Chemical plants: Safety valves are used in chemical plants to protect the process equipment, such as reactors, from overpressure conditions that could cause equipment failure or release of hazardous materials.

Description:

  • Materials: Cast iron, Ductile Iron,SS304, SS316, CF8, CF8M,Carbon steel(WCB, WCC,WC6, LCB, LF2, WC9)
  • Class: 150 to 2500.
  • Nominal Pressure: PN10 to PN450.
  • Size: ½” to 40”
 
KSA SAFETY VALVE MANUFACTURER IN SAUDI AREBIA
Scroll to Top